1-800-KENT-USA | sales@kentusa.com | Need Parts? Parts Store

SGS-816M Manual Hand Feed Grinder

Product Features

  • 8”x16” working capacity
  • Downfeed dial graduated in 0.0001”
  • Roller ball on linear table ways for easy and smooth longitudinal movements
  • High column, 18” spindle center to table for extra clearance under the wheel
  • 8” cross traverse for extra width and capacity, perfect for the mold shops
  • Centralized automatic lubrication system provides lubrication to all points
  • Safety 24V control circuit power
  • Micro-downfeed and rapid elevation (MR Model)

Standard Accessories

  • Grinding wheel
  • Wheel flange
  • Wheel balancing base
  • Wheel balancing arbor
  • Diamond table dresser base & tip
  • Leveling bolts & pads
  • Halogen Work light
  • Toolbox with tools

Optional Accessories

  • Fine pole electric chuck & control
  • Permanent chuck
  • Dust-suction coolant system
  • Flood coolant system
  • Overhead parallel dresser
  • Extra wheel flange
  • DRO system

Specification Table

  • Working Capacity
  • Table Travel
  • Saddle Travel
  • T-Slot
  • Spindle Motor
  • Spindle Speed
  • Grinding Wheel
  • Vertical Graduation
  • Vertical Revolution
  • Spindle to Table
  • Net Weight
  • Gross Weight
  • CGS-618M

  • 6" x 18"
  • 19"
  • 6.69"
  • 1 x 9/16”
  • 3 HP
  • 3470 RPM
  • 8” x 1/2” x 1-1/4”
  • 0.0005"
  • 0.050"
  • 18"
  • 1600 LBS
  • 1800 LBS
  • SGS-816M/MR

  • 8" x 16"
  • 17"
  • 8.25"
  • 1 x 9/16”
  • 2 HP
  • 3500 RPM
  • 8” x 1/2” x 1-1/4”
  • 0.0001"
  • 0.050"
  • 18"
  • 1430 LBS
  • 1760 LBS
  • KGS-1020

  • 10" x 20"
  • 24.5"
  • 11"
  • 1 x 9/16”
  • 3 HP
  • 3420 RPM
  • 12" x 1" x 3"
  • 0.0002"
  • 0.050"
  • 21"
  • 3256 LBS
  • 3800 LBS