HR-35 Series

Features

  • 20 HP Spindle Motor, 12-Speeds
  • 4.1” (6.1” Opt)Spindle Through Hole
  • Solid One Piece Full Length Casting Base and Bedways for Maximum Rigidity
  • Spindle Jog Button Control
  • One-shot Lubrication for Apron, Multi-position Adjustable Feed Position Stops
  • Dual Inch/Metric Calibrated Tailstock Quill with Knockout Tang; Heavy Duty Two Speed Tailstock
  • Dual Inch/Metric Dials (Optional)

   

Specifications

Specification HR-30 SeriesHR-35 SeriesLA-34 Series
Swing Over Bed 30.7" 34.6" 34"
Swing Over Cross Slide 21.25" 25.2" 24.4"
Swing Over Gap 42.1" 46" 46"
Width of Bed 18" 19" 20"
Distance Between Centers 80" (Opt. 120" / 160" / 200") 120" (Opt. 80" / 160" / 200") 60" (Opt. 80", 120", 160", 200")
Cross Slide Travel 15.35" 17.32" 11.02"
Top Slide Travel 9.4" 9.4" 12"
Spindle Bore 4" 4.1" (Opt. 6.1") 6" (Opt. 9", 12")
Spindle Speeds 12 12 18
Spindle Speed Range 14-1000 RPM 14-1000 RPM 5 – 670 RPM (Opt. 4 – 500 RPM)
Through Hole Diameter 4.1" (Opt. 6.1") 4.1" (Opt. 6.1") 6"
Spindle Nose D1-11 or A1-11 D1-11 or A1-11 A2-11 (Opt. A2-15)
Spindle Bore Taper MT#7 - MT#5 MT#7 - MT#5 MT#5 (Opt. MT#6)
Thread – Standard (Whit-worth) 36 (2-72) TPI 45 (2-72) TPI 30 – 0.25 TPI
Thread – Metric Pitch 65 (0.8-14) mm 39 (0.2-14) mm 1 – 120 mm
Longitudinal Feed 0.002"–0.0276" in/rev 0.002"–0.0276" in/rev 0.0032 – 0.096 ipr
Cross Feed 0.001"–0.00138" 0.001"–0.00138" 0.0016 – 0.048 ipr
Quill Travel 8.3" 12" 5.9" (Opt. 7.9")
Quill Diameter 4.133" 4.133" 4.9" (Opt. 6.5")
Quill Bore Taper MT#6 MT#6
Main Motor 20 HP 20 HP 20 HP (Opt. 30 HP)
Coolant Pump Motor 1/8 HP 1/8 HP 1/8 HP
Packing Dimension 151" / 198" / 231" / 270" x 69" x 73" 198" x 69" x 73" 127" – 265" x 43" x 62"

Accessories

Standard Accessories

Standard Accessories

  • 3-position carriage stop
  • 4-position tool post
  • Steady rest
  • Halogen work light
  • Thread chasing dial
  • Coolant system

Optional Accessories

  • Digital Readout System
  • Chuck cover
  • 4-jaw independent chuck
  • Face plate
  • Royal spindle type live center
  • Taper turning attachment
  • BTC 3-jaw chuck with back plate
  • Micrometer carriage stop
  • Rustlick coolant

Request for Info