Home > Products > Lathes > HR 35120

HR-35120 Manual Lathe

Key Features

•20 HP Spindle Motor, 12-Speeds

•4.1” (6.1” Opt)Spindle Through Hole

•Solid One Piece Full Length Casting

   Base and Bedways for Maximum Rigidity

•Spindle Jog Button Control

 

•One-shot Lubrication for Apron, Carriage, and Bed Ways

•Multi-position Adjustable Feed Position Stops

•Dual Inch/Metric Calibrated Tailstock Quill with Knockout Tang

•Heavy Duty Two Speed Tailstock

•Dual Inch/Metric Dials with Quick-change Sleeve

General Specifications:

Machine Capacity

Swing over bed 34.6” (880mm)
Swing over cross slide 25.2” (640mm)
Swing over gap 46” (1170mm)
Gap length (w/ face plate) 19” (482mm)
Width of bed 18” (458mm)
Distance between centers 120” (3000mm)

Headstock

Spindle hole 4.1” (105mm) (Optional 6.1” (155mm))
Spindle nose camlock D1-11 or A1-11 (A2-11 for 6” bore spindle)
Spindle to sleeve taper 1/21.6 – MT#5(1/19.002 – MT#5 for 6” bore spindle)
Spindle speed 12 Steps, (12, 20, 29, 40, 55, 85, 120, 175, 300, 445, 650, 1000), (10, 17, 25, 36, 47, 70, 100, 150, 245, 370, 540, 800 for 6” bore spindle style) RPM
Spindle speed ranges N/A

Carriage

Bearing length on ways 32” (815mm)
Cross slide width 10.2” (260mm)
Cross slide travel 17.32” (440mm)
Top slide (compound) travel 9.4” (240mm)

Feed Box

Thread capacity (inches) 36 (2-28) tpi
Thread capacity (metric) 65 (0.8-14) mm
Modular threads range 22 (0.5-7) mod
Diametral pitch range 36 (4-56) DP
Longitudinal feeds 0.002 – 0.0276 IPR
Cross feeds 0.001 – 0.0138 IPR

Tailstock

Quill travel 4.133” (105mm)
Quill diameter 8.3” (210mm)
Quill bore taper MT #6

Power

Main motor 20 HP
Coolant pump motor 1/8 HP
Control circuit voltage 24 V

Dimension

Shipping dimension 198”x69”x73”

Weight

Net weight 9900 lbs
Gross weight 10670 lbs

OPTIONS AND ACCESSORIES:

 

Optional 6” spindle bore

DRO for 120”(2-axis, x=0.0001”/z=0.0002” res)

DRO installation charge

Aloris DA #5-SET (Tool Post and 6 holders)

Royal spindle type live center (M.T. #6)

3-jaw chuck w/back plate (20” A1-11, A2-11 for 6” bore)

BTC 3-jaw chuck w/back plate (Zero-set, 15” A1-11 or A2-11)

 

 

4-jaw independent Chuck (20” A1-11, A2-11 for 6” bore

4-jaw independent Chuck (25” A1-11, A2-11 for 6” bore)

Face plate (20” A1-11, A2-11 for 6” bore)

Taper turning attachment

Micrometer carriage stop

Rustlick coolant (1 gallon, mixes 1:30)

Spindle rear mount back plate