Home > Products > Lathes > KLS 2280C

KLS 2280C Manual Lathe

Key Features

•10 HP main spindle motor, 12 speeds

•D1-8 camlock, 4.1” spindle bore

•Hardened and ground gears and bedways

•Jog button, 4-way rapid traverse

 

•Mechanical clutch style headstock

•Inch dials and leadscrews

•Centralized lube system in headstock

•Safety Foot brake

General Specifications:

Machine Capacity

Swing over bed 22” (560 mm)
Swing over cross slide 12.5” (320 mm)
Swing over gap 30” (770 mm)
Effective gap length 9” (240 mm)
Width of bed 16” (405 mm)
Distance between centers 80” (2000 mm)
Cross slide travel 10.2” (260 mm)
Top slide travel 5.75” (145 mm)

Main Spindle

Spindle speeds 12 speeds
Spindle speed range 36-1600 rpm
Through hole diameter 4.12” (105 mm)
Spindle nose D1-8 camlock
Spindle bore taper MT #6 with sleeve

Threads

Standard (Whit-worth) 32 (2 to 28) tpi
Metric pitch 18 (1.25 to 14) mm
Module (mm) 14 (0.75 to 7) mm
Diametral 24 (4 to 56) dp

Feeds

Longitudinal feeds 0.0024”-0.0992” in/rev
Cross feeds 0.0011”-0.042” in/rev

Leadscrew

Leadscrew diameter 1-9/16” (40 mm)
Thread pitch 2 tpi

Tailstock

Quill travel 6” (150 mm)
Quill diameter 2.9” (75 mm)
Quill bore taper MT #5

Power

Main motor 10 HP (3-phase)
Coolant pump motor 1/8 HP (3-phase)

Dimension

Overall dimension 137” x 45” x 57” (LxWxH)
Packing dimension 143” x 55” x 84” (LxWxH)

Weight

Net weight 7260 lbs
Gross weight 7760 LBS

OPTIONS AND ACCESSORIES:

 

DRO system (Acu-Rite, Newall, Sony, etc.)

DRO installation charge

Aloris CA #4-set (tool post plus 6 bars)

Aloris DA #5-set (Heavier duty tool post plus 6 bars)

5C lever style collet closer

 

 

Royal spindle type live center (M.T. #5)

BTC 3-jaw chuck w/back plate (Zero-set, 10” D1-8)

BTC 3-jaw chuck w/back plate (Zero-set, 12” D1-8)

Taper turning attachment

Rustlick coolant (1 gallon, mixes 1:30)