Home > Products > Lathes > KLS 26120C

KLS 26120C Manual Lathe

*Shown with KLS-2680C model

 

Key Features

•10 HP main spindle motor, 12 speeds

•D1-8 camlock, 4.1” spindle bore

•Hardened and ground gears and bedways

•Jog button, 4-way rapid traverse

•Mechanical clutch style headstock

•Inch dials and leadscrews

•Centralized lube system in headstock

•Safety Foot brake

 

 

General Specifications:

Machine Capacity

Swing over bed 26” (660 mm)
Swing over cross slide 16.5” (420 mm)
Swing over gap 34” (870 mm)
Effective gap length 9” (240 mm)
Width of bed 16” (400 mm)
Distance between centers 120” (3048 mm)
Cross slide travel 12.2” (310 mm)
Top slide travel 5.75” (145 mm)

Main Spindle

Spindle speeds 12 speeds
Spindle speed range 36-1600 rpm
Through hole diameter 4.12” (105 mm)
Spindle nose D1-8 camlock
Spindle bore taper MT #6 with sleeve

Threads

Standard (Whit-worth) 40 (4-112) tpi
Metric pitch 22 (0.45-7.5) mm
Module (mm) 14 (0.75 to 7) mm
Diametral 24 (4 to 56) dp

Feeds

Longitudinal feeds 0.0024”-0.0992” in/rev
Cross feeds 0.0011”-0.042” in/rev

Leadscrew

Leadscrew diameter 1-9/16” (40 mm)
Thread pitch 2 tpi

Tailstock

Quill travel 6” (150 mm)
Quill diameter 2.9” (75 mm)
Quill bore taper MT #5

Power

Main motor 10 HP (3-phase)
Coolant pump motor 1/8 HP (3-phase)

Dimension

Overall dimension 177” x 45” x 57” (LxWxH)
Packing dimension 185” x 55” x 84” (LxWxH)

Weight

Net weight 8580 lbs
Gross weight 9180 LBS

OPTIONS AND ACCESSORIES:

 

DRO system (Acu-Rite, Newall, Sony, etc.)

DRO installation charge

Aloris DA #5-set (tool post plus 6 bars)

5C lever style collet closer

Royal spindle type live center (M.T. #5)

 

 

BTC 3-jaw chuck w/back plate (Zero-set, 10” D1-8)

BTC 3-jaw chuck w/back plate (Zero-set, 12” D1-8)

Taper turning attachment

Rustlick coolant (1 gallon, mixes 1:30)