Home > Products > Lathes > LA 30120

LA-30120 Manual Lathe

*Shown with LA-2680

                                                                                                                                                                  

                                                                                                                                                               *LA-2680 model shown

Key Features

•15 HP Spindle Motor, 12-Speeds

•Precision Spindle with 3 Point Support

•4.1” Spindle Through Hole

•Hardened and ground spindle gears, shafts,

  and bedways

•Solid Full Length Casting Base

•Full-length Safety Foot Brake

 

•Spindle Jog Button Control

•One-shot/Auto Lubrication for Apron, Carriage, and Bed Ways

•Multi-position Adjustable Feed Position Stops

•Dual Inch/Metric Calibrated Tailstock Quill

•Heavy Duty Two Speed Tailstock

General Specifications:

Machine Capacity

Swing over bed 30” (760mm)
Swing over cross slide 22” (560mm)
Swing over gap 39.9” (1015mm)
Gap length (w/ face plate) 10.625” (270mm)
Width of bed 15.75” (400mm)
Distance between centers 118” (3000 mm)

Headstock

Spindle hole 4.1” (104mm)
Spindle nose camlock D1-11
Spindle to sleeve taper MT#7 – MT#5
Spindle speed 12 Steps, 36 – 1200 RPM
Spindle speed ranges (13, 20, 30, 47, 70, 105, 150, 230, 340, 530, 800, 1200)

Carriage

Bearing length on ways 21.5” (545mm)
Cross slide width 8.625” (220mm)
Cross slide travel 16” (400mm)
Top slide (compound) travel 7.5” (190mm)

Feed Box

Thread capacity (inches) 45 (2-72) tpi
Thread capacity (metric) 39 (0.2-14) mm
Modular threads range Text Cell
Diametral pitch range Text Cell
Longitudinal feeds 0.0015 – 0.04 IPR
Cross feeds 0.00075 – 0.02 IPR

Tailstock

Quill travel 2.95” (75mm)
Quill diameter 7” (178mm)
Quill bore taper MT #5

Power

Main motor 15 HP
Coolant pump motor 1/8 HP
Control circuit voltage 115 V

Dimension

Shipping dimension 177”x59”x71”

Weight

Net weight 10120 lbs
Gross weight 10560 lbs

OPTIONS AND ACCESSORIES:

 

DRO System 80”(2-axis, x=0.0001”/z=0.0005” res)

DRO installation charge

Aloris DA #5-SET (Tool Post and 6 holders)

Royal spindle type live center (M.T. #5)

BTC 3-jaw chuck w/back plate (Zero-set, 15” D1-11)

4-jaw independent Chuck (20” D1-11)

 

 

4-jaw independent Chuck (25” D1-11)

Face plate (20” D1-11)

Taper turning attachment

Micrometer carriage stop

Rustlick coolant (1 gallon, mixes 1:30)