Home > Products > Lathes > ML2060T

ML-2060T Manual Lathe

Key Features

•7.5 HP Spindle Motor, 12-Speeds

•3.125” Spindle Through Hole

•Solid Full Length Casting Base with

   Front Loading Chip Tray for Easier Cleaning

•Adjustable Over-load Feed Clutches

•Quick Reversal Feed from Apron

•Full-length Safety Foot Brake

•Spindle Jog Button Control

 

•One-shot Lubrication for Apron, Carriage, and Bed Ways

•Multi-position Adjustable Feed Position Stops

•Dual Inch/Metric Calibrated Tailstock Quill with Knockout Tang

•Heavy Duty Two Speed Tailstock

•Dual Inch/Metric Dials with Quick-change Sleeve

General Specifications:

Machine Capacity

Swing over bed 20” (508mm)
Swing over cross slide 14” (353mm)
Swing over gap 27.5” (700mm)
Gap length (w/ face plate) 8” (200mm)
Width of bed 12” (305mm)
Distance between centers 57” (1450mm)

Headstock

Spindle hole 3.125” (80mm)
Spindle nose camlock D1-6
Spindle to sleeve taper MT#7 – MT#4
Spindle speed 12 Steps, 36 – 1800 RPM
Spindle speed ranges N/A

Carriage

Bearing length on ways 17.3” (440mm)
Cross slide width 7.25” (185mm)
Cross slide travel 10.6” (270mm)
Top slide (compound) travel 4.75” (120mm)

Feed Box

Thread capacity (inches) 45 (2-72) tpi
Thread capacity (metric) 39 (0.2-14) mm
Modular threads range 18 (0.3-3.5) mod
Diametral pitch range 21 (8-44) DP
Longitudinal feeds 0.0015 – 0.04 IPR
Cross feeds 0.00075 – 0.02 IPR

Tailstock

Quill travel 2.3” (59mm)
Quill diameter 5” (130mm)
Quill bore taper MT #4

Power

Main motor 7.5 HP
Coolant pump motor 1/8 HP (3-phase)
Control circuit voltage 115 V

Dimension

Shipping dimension 115”x39”x63”

Weight

Net weight 4510 lbs
Gross weight 5390 lbs

OPTIONS AND ACCESSORIES:

 

Acu-Rite 200S DRO (2-axis, x=0.0001”/z=0.0002” res)

DRO installation charge

Aloris CXA #4-Set (tool post plus 6 holders)

5C lever style collet closer

Royal spindle type live center MT#4

BTC 3-jaw chuck w/back plate (Zero-set, 8” D1-6)

BTC 3-jaw chuck w/back plate (Zero-set, 10” D1-6)

 

 

4-jaw independent chuck (10” D1-6)

Taper turning attachment

Face plate (12” D1-6)

Micro carriage stop

Rustlick coolant (1 gal, mixes 1:30)