Kent USA provides a full range of premium quality radial arm drills. Our radial arm drills are made only with high class cast iron under heat treatment and grinding. The columns, arms, and gear boxes can be set to be mutually independent or synchronous with clamping. In addition, our radial arm drills are also equipped with friction type disc clutch to absorb impact force caused by the vertical movement of the spindle to protect the transmission inside the box. As a safety feature, our radial arm drills are equipped with a special arm elevating mechanism, not found in most competitor machines, to prevent the arm from abruptly falling after several years of heavy usage.
|Machine Model||Arm Length||Spindle Axis to Column||Outer Column Diameter||Spindle Motor||Spindle Taper|
|TPR-720A||32″||8.7″ to 29.5″||8.26″||2 HP||M.T. #4||Request Info||Details|
|TPR-920A||39.7″||8.7″ to 37.4″||8.26″||2 HP||M.T. #4||Request Info||Details|
|TPR-1230H||48″||13.4″ to 46″||11.8″||3 HP||M.T. #4||Request Info||Details|
|TPR-1600H||64″||17.3″ to 62″||17″||7.5 HP||M.T. #5||Request Info||Details|
|TPR-2000H||82″||19.3″ to 78.7″||17″||7.5 HP||M.T. #5||Request Info||Details|
|TPR-C2500||102″||19.6″ to 98.4″||21.6″||10 HP||M.T. #6||Request Info||Details|