SSM-1340BV
Features
- 3 HP main spindle motor
- Infinitely variable spindle speeds with digital RPM display in Hi/Low gear speed ranges
- Capable of being run on single phase or 3 phase power
- Jog button for easy gear changes
- Hardened and ground gears and bedways
- Cast iron machine bedways
- Removable chip pan for easy clean up
- Foot brake and T-Slot compound
- Inch/metric ruler on tailstock quill
Specifications
| Specification | SSM-1340BV |
|---|---|
| Swing Over Bed | 13" |
| Swing Over Cross Slide | 8-1/4" |
| Swing Over Gap | 18-1/2" |
| Width of Bed | 7-1/2" |
| Distance Between Centers | 40" |
| Cross Slide Travel | 6-3/4" |
| Top Slide Travel | 3-1/2" |
| Spindle Bore | 1.5" |
| Spindle Speeds | 2 |
| Spindle Speed Range | 40-365 & 218-2000 RPM |
| Through Hole Diameter | 1-9/16" |
| Spindle Nose | ASA D1-4 Camlock |
| Spindle Bore Taper | MT#5 |
| Thread – Standard (Whit-worth) | 34 (2-56) TPI |
| Thread – Metric Pitch | 33 (0.5-12) mm |
| Longitudinal Feed | 0.0016"–0.046" |
| Cross Feed | 0.0005”-0.015” |
| Lead Screw Diameter | 7/8" |
| Threading Pitch | 8 TPI |
| Quill Travel | 4" |
| Quill Diameter | 1-9/16" |
| Quill Bore Taper | MT#3 |
| Main Motor | 3 HP |
| Coolant Pump Motor | 1/8 HP |
| Machine Dimension | 74" x 28" x 54" |
| Packing Dimension | 77" x 30" x 60" |
| Machine weight | 1320 LBS |
| Packing weight | 1584 LBS |
Accessories
Standard Accessories
- 3-jaw chuck (6″)
- 4-jaw chuck (8″)
- Steady rest
- Follow rest
- 4-position tool post
- Coolant system
- Full-length splash guard
- Worklight
- Chuck cover
- Thread chasing dial
- Toolbox with standard tools
Optional Accessories
- Digital Readout System (View Brochure)
- Royal spindle type live center
- Zero-set 3-jaw chuck with back plate
- Taper turning attachment
- Rustlick coolant
