KTM-2VH-JY

  • 5 HP horizontal spindle motor, 9 speed ranges. 5 H.P. vertical spindle motor, 16 12” x 51” hardened and ground table top
  • Saddle and knee with hardened and ground square (box) ways
  • Precision ballscrews in X & Y axes
  • X & Y axes driven by AC servo motor
  • Precision bored and ground milling head, with super precision ABEC-7 bearings
  • Meehanite® casting, with built in coolant reservoir in machine base
  • Coolant system and chip tray
  • Centralized automatic lubrication, with metered check-valves

Request for Info



Specifications

Specification KTM-2HT-JYKTM-2VH-JY
Table Size 12" x 51" 12" x 51"
Table Travel (X-Axis) 39.4" 39.4"
Saddle Travel (Y-Axis) 14” Auto (15.4” manual) 14” Auto (15.4” manual)
Knee Travel (Z-Axis) 17” Auto (19.3” manual) 17” Auto (19.3” manual)
T-Slot 0.63" x 3 x 0.12" 0.63" x 3 x 0.12"
X, Y, Z Feedrate 0-98"/min infinitely variable 0-98"/min infinitely variable
X, Y, Z Rapid Feedrate 98"/98"/30"/min 98"/98"/30"/min
Spindle Motor 5 HP 5 HP
Vertical Spindle Speed 85 - 1300 RPM (9 steps) 85 - 1300 RPM (9 steps)
Vertical Spindle Taper NT-40 NT-40
Spindle Nose to Table - 0 - 15.2"
Spindle Center to Column - 14.5"
Horizontal Spindle Speed 75 - 3600 RPM (16 steps) 85 - 1300 RPM (9 steps)
Horizontal Spindle Taper NT-40 NT-40
Spindle Center to Table - 0 - 17.7"
Maximum Work Load 1000 lbs 1000 lbs
Machine Net Weight 5500 lbs 4950 lbs
Shipping Weight 6160 lbs 5610 lbs
Dimensions 85" x 80" (skid) 85" x 80" (skid)

Accessories

Optional Accessories

  • DRO System
  • Air Power Drawbar (Per Spindle)
  • Angle-Lock Vice
  • Rotary Table (Vertical and Horizontal)
  • Clamping Kit
  • Chuck System
  • Rustlick Coolant (1 Gal, Mixes 1:30)

Request for Info