KTM-3VS

  • 3 HP spindle motor, 60-4200 infinitely variable speed milling head
  • 9” x 49” hardened and ground table
  • Table, saddle, and knee with hardened and ground dovetail ways
  • Precision ground leadscrews with backlash compensating double nut
  • Precision bored and ground milling head, with super precision ABEC-7 bearings
  • Meehanite® casting, with built in coolant reservoir in machine base
  • Centralized one-shot lubrication, with metered check-valves

Request for Info



Specifications

Specification KTM-3SKTM-3VSKTM-3VSF
Table Size 9" x 42" 9" x 49" (Opt. 9" x 42") 9" x 49" (10" x 54" Optional)
Table Travel (X-Axis) 28" 35" 35"
Saddle Travel (Y-Axis) 12" 12" 12"
Knee Travel (Z-Axis) 15" 15" 15"
Quill Travel 5" 5" 5.5"
Ram Travel 14.5" 14.5" 14.5"
Spindle Motor 3 HP 3 HP 3 HP
Spindle Speed 80–5440 RPM (16–Speeds) 60–500–4200 RPM (standard variable speed model) 60–550–4500 RPM (60–6000* on HS head optional)
Spindle Taper R-8 R-8 (NMTB-30 or Quick change spindle optional) R-8
Quill Diameter 3.375" 3.375" 3.375"
Quill Feed Rate 0.0015" / 0.003" / 0.006" in/rev 0.0015" / 0.003" / 0.006" in/rev 0.0015" / 0.003" / 0.006" in/rev
Drilling Capacity (Manual / Power) 0.75" / 0.37" diameter 0.75" / 0.37" diameter 0.75" / 0.37" diameter
Boring Capacity 6" diameter 6" diameter 6" diameter
Milling Capacity 2.0 in³/min 2.0 in³/min 2.0 in³/min
Maximum Work Load (Center) 750 lbs 850 lbs 750 lbs
Spindle Center to Column 5" - 19.5" 5" - 19.5" 5" - 27"
Net Weight 2200 lbs 2500 lbs 2500 lbs
Gross Weight 2300 lbs 2800 lbs 2600 lbs
Shipping Dimensions 72" x 72" (skid) 72" x 72" (skid) 72" x 72" (skid)
Power Requirements 220 volts, 3 phase, 60 Hz, 10 Amp (optional 440v, requires 5 Amp) 220 volts, 3 phase, 60 Hz, 10 Amp (optional 440v, requires 5 Amp) 220v, 3 phase, 60 Hz, 10 Amp (optional 440v power requires 5A) but can also accept 220v, 1-phase power (15A) without a phase converter, ideal for customers with only 1-phase power

Accessories

  • Quick change tooling package (Mach-1)
  • Digital Readout System (View Brochure)
  • NMTB-30 spindle
  • Flood coolant system (Built-in base)
  • Knee (Z-Axis) Power Feed
  • Air Power Drawbar
  • 3-D Edge Finder
  • Flood Coolant System
  • Chip Tray
  • Knee Linear Encoder Feedback for Coupled Z-Axis Position
  • AMI with programmable M-functions

Brochures

Title: Kent USA Mill Brochure 2018

Request for Info