TPR-1600H

  • 12 spindle speed and 3 feed rates
  • Centralized single level control for forward and reversal of spindle
  • Ultra low noise
  • Light and handy to operate
  • Safety overload
  • Auxiliary dial for spindle feed depth
  • With standard accessories

Request for Info



Specifications

Specification TPR-1230HTPR-1600HTPR-2000H
Maximum Drilling Diameter (Castings/Steel) 2.16″ / 1.65″ 2.75″ / 2.55″ 2.75″ / 2.55″
Distance Between Spindle Axis and Column (max/min) 46″ / 13.4″ 63″ / 13.7″ 78.7″ / 19.3″
Distance Between Spindle End and Working Surface of Base Plate (max/min) 53.9″ / 19.3″ 62.9″ / 17.3″ 62.9″ / 14.9″
Spindle Taper M.T. 4 M.T. 5 M.T. 5
Range of Spindle Speed 44-1500 RPM (12 steps) 40-1920 RPM (12 steps) 35-1890 RPM (12 steps)
Range of Spindle Feed Speed 0.002″, 0.0035″, 0.0059″/Rev. (3 Steps) 0.0027”-0.0378”/Rev. (6 steps) 0.0027”-0.0378”/Rev. (6 steps)
Diameter of Outer Column 11.8″ 17″ 17″
Length of Arm 48” 64" 82"
Table Size 25” X 20.5” X 16.3” 27.5″ x 19.7″ x 15.7″ 39.4″ x 31.5″ x 19.7″
Spindle Motor 3 HP (2 speed motor) 7.5 HP 7.5 HP
Net Weight 4620 LBS 10120 LBS 12320 LBS
Gross Weight 5060 LBS 11220 LBS 14520 LBS

Accessories

Standard Accessories

  • Work table
  • Tool releasing wrench
  • Drift
  • Reducing sleeve
  • Coolant system
  • Work light

Brochures

Title: Kent USA Radial Arm Drill 2016

Videos

Kent USA TPR Series Radial Arm Drills Operation

Request for Info