TPR-920A

  • 6 spindle speed and 3 feed rates
  • Centralized single level control for forward and reversal of spindle
  • Ultra low noise
  • Light and handy to operate
  • Safety overload
  • Auxiliary dial for spindle feed depth
  • With standard accessories

Request for Info



Specifications

Specification TPR-720ATPR-920ATPR-1230H
Maximum Drilling Diameter (Castings/Steel) 1.97″ / 1.25″ 1.97″ / 1.25″ 2.16″ / 1.65″
Distance Between Spindle Axis and Column (max/min) 29.5″ / 8.7″ 37.4″ / 8.7″ 46″ / 13.4″
Distance Between Spindle End and Working Surface of Base Plate (max/min) 41.7″ / 10.2″ 47.6″ / 13.8″ 53.9″ / 19.3″
Spindle Taper M.T. 4 M.T. 4 M.T. 4
Range of Spindle Speed 88, 154, 282, 455, 796, 1500 RPM (6 Steps) 88, 154, 282, 455, 796, 1500 RPM (6 Steps) 44-1500 RPM (12 steps)
Range of Spindle Feed Speed 0.002″, 0.0035″, 0.0059″/Rev. (3 Steps) 0.002″, 0.0035″, 0.0059″/Rev. (3 Steps) 0.002″, 0.0035″, 0.0059″/Rev. (3 Steps)
Diameter of Outer Column 8.26″ 8.26″ 11.8″
Length of Arm 32” 32” 48”
Table Size 24″ x 17.5″ x 15″ 24″ x 17.5″ x 15″ 25” X 20.5” X 16.3”
Spindle Motor 2 HP 2 HP 3 HP (2 speed motor)
Net Weight 2530 LBS 2750 LBS 4620 LBS
Gross Weight 2680 LBS 3080 LBS 5060 LBS

Accessories

Standard Accessories

  • Work table
  • Tool releasing wrench
  • Drift
  • Reducing sleeve
  • Coolant system
  • Work light

Brochures

Title: Kent USA Radial Arm Drill 2016

Request for Info