TPR-C2500

  • 16 spindle speed and 16 feed rates
  • Centralized single level control for forward and reversal of spindle
  • Ultra low noise
  • Light and handy to operate
  • Safety overload
  • Auxiliary dial for spindle feed depth
  • With standard accessories

Request for Info



Specifications

Specification TPR-1600HTPR-2000HTPR-C2500
Maximum Drilling Diameter (Castings/Steel) 2.75″ / 2.55″ 2.75″ / 2.55″ 3.94″ / 3.15″
Distance Between Spindle Axis and Column (max/min) 63″ / 13.7″ 78.7″ / 19.3″ 98.4″ / 19.68″
Distance Between Spindle End and Working Surface of Base Plate (max/min) 62.9″ / 17.3″ 62.9″ / 14.9″ 78.7″ / 21.6″
Spindle Taper M.T. 5 M.T. 5 M.T. 6
Range of Spindle Speed 40-1920 RPM (12 steps) 35-1890 RPM (12 steps) 16-1250 RPM (16 steps)
Range of Spindle Feed Speed 0.0027”-0.0378”/Rev. (6 steps) 0.0027”-0.0378”/Rev. (6 steps) 0.0016”-0.125”/Rev. (16 steps)
Diameter of Outer Column 17″ 17″ 21.6″
Length of Arm 64" 82" 102"
Table Size 27.5″ x 19.7″ x 15.7″ 39.4″ x 31.5″ x 19.7″ 39.4″ X 31.5″ X 22″
Spindle Motor 7.5 HP 7.5 HP 10 HP
Net Weight 10120 LBS 12320 LBS 24200 LBS
Gross Weight 11220 LBS 14520 LBS 27500 LBS

Accessories

Standard Accessories

  • Work table
  • Tool releasing wrench
  • Drift
  • Reducing sleeve
  • Coolant system
  • Work light

Brochures

Title: Kent USA Radial Arm Drill 2016

Request for Info