fbpx

Largest Kent USA (Manual/CNC) Lathes IN STOCK!

Jun 08, 2021
Share this article:

Largest Kent USA (Manual/CNC) Lathes IN STOCK!

These are the largest lathes that we have in stock right now. In case these are too big, we have over 150 smaller lathesmillsgrindersEDMs, and radial arm drills ready to ship.

 

Kent-USA-LA34X120-01-2021 Lathe

1. LA-38120 Precision Lathe – 38″ x 120″ / 9″ spindle bore / 20 HP

  • Rigid one-piece headstock casting design
  • Electromagnetic brake
  • 18-step speeds for higher torque
  • Auto-lubrication system
  • Cross slide on ballscrews
  • Laser inspected bed
  • Single piece Meehanite bed casting
  • Shafts and gears are hardened and ground to HRC 45±2
  • Optional double chucks for longer workpieces

Kent-USA-HW-Series-Lathe

2a. HW-30120 Precision Lathe – 30″ x 120″ / 4.5″ Spindle Bore / 15 HP
2b. HW-2680 Precision Lathe – 26″ x 80″ / 4.5″ Spindle Bore / 15 HP

  • 15 HP spindle motor, 12-speeds
  • 4.5″ (115 mm) spindle through hole
  • Solid one-piece full length casting base and bedways for maximum rigidity
  • Spindle jog button control
  • One-shot lubrication for apron, multi-position adjustable feed position stops
  • Dual inch/metric calibrated tailstock
  • Dual inch/metric dials

 

Kent-CNC-KLR-200S-Sub-Spindle-Horizontal-Turning-Center

3. KLR-200SM with Sub-Spindle CNC Turning Center w/ Fanuc 0i-TF –  20.5″ swing X 17.7″ length / 12-tool stations / 4500/6000 rpm (main/sub -spindle)

  • Symmetrically designed reinforced headstock for main & sub
  • High precision spindle with dual-roller bearing and self-alignment angular bearings
  • 3 soft jaw sets and 1 hard jaw set each spindle
  • Fanuc “i” series high torque spindle and axis motorsHigh power spindle motor
  • High speed / high accuracy 12 stations powered live tool servo turret
  • Powerful thru-hole sub-spindle for flexible complete machining
  • Fully enclosed way covers and enclosure
  • Induction hardened and precision ground box ways
  • Certified Meehanite machine casting for superior dampening and stability
  • High-grade C3 precision ball screws and pretension for enhanced precision
  • Auto lubrication system metered check valves and piston distributor

Kent-CNC-KLR-200-CNC-Horizontal-Turning-Center-600x572

4. KLR-200 2-Axis CNC Turning Center w/ Fanuc 0i-TF – 35.6″ x 82″ / 20 HP / 45° True Slant Bed

  • Up to 15″ 3-jaw chuck with 5.15″ bar capacity
  • Up to 35.4″ max turning diameter and 82″ max turning length
  • High speed / high accuracy 12 station turret
  • Induction hardened and precision ground box ways
  • 45° slant bed with one piece Meehanite® casting for superior dampening and stability
  • High-grade C3 precision ball screws and pretension for enhanced precision
  • Auto lubrication system metered check valves and piston distributor
  • Programmable spindle air blow tube

 


 

Here’s a quick read on our 3 things to consider when shopping for a large bore lathe:

3 things to consider when shopping for a large bore lathe

Share this article:

Contact Us!

Kent Industrial USA, Inc.
1231 Edinger Avenue
Tustin CA 92780 USA
1.800.KENT.USA
+1.714.258.8526
Array
(
)
Hi