Wire Cut Flushing Type EDM

Kent USA Flushing Type Wire EDMs can cut plates as thick as 300 mm and are ideal for creating punches, tools and dies from exotic hard metals that are difficult to machine with conventional methods. They can machine complex geometric forms with tooling wear and absolute consistency since there is no contact between the cutting wire and the workpiece surface. Parts formed through the Wire EDM process can be used immediately in assembly, with little or no additional finishing. Kent USA Flushing Type Wire EDMs can machine workpiece sizes of 22″ x 18.5″ x 4.5″ to 54″ x 29.9″ x 11.6″, workpiece weight of up to 2866 lbs, and water tank capacity of up to 95 gallons. All Kent USA Flushing Type Wire EDMs are backed by our 15-month warranty.

ModelMax Work Piece SizeMax Work Piece WeightWater Tank Capacity
WFI-3030" x 20.4" x 11.6"1102 lbs71.3 Gallons
WFI-5034” x 20.5” x 11.6”1543 lbs71.3 Gallons
WFI-6043.3” x 25.6” x 13.4”2204 lbs95 Gallons
WFI-7046” x 26.7” x 11.6”2204 lbs95 Gallons
WFI-9054” x 29.9” x 11.6”2866 lbs95 Gallons

Contact Us!

Kent Industrial USA, Inc.
1231 Edinger Avenue
Tustin CA 92780 USA
1.800.KENT.USA
+1.714.258.8526
Array
(
)
Hi