MLX-2060T

What’s NEW with the MLX model?

10-HP-Motor

10 HP Spindle Motor

D1-8 Spindle Nose

D1-8 Spindle Nose

Electric cabinet interlock (or lockout) switch

Electric cabinet interlock

(or lockout) switch

Standard Limit Switch

Chuck cover with

interlock switch

Standard Leadscrew Cover

Leadscrew Cover

25-1500 RPM Spindle Range

26-1500 RPM, 12 Steps

  • 3.125” Spindle Through Hole
  • Solid Full-Length Casting Base with Front Loading Chip Tray for Easier Cleaning
  • Adjustable Over-load Feed Clutches
  • Quick Reversal Feed from Apron
  • Full-length Safety Foot Brake
  • Spindle Jog Button Control
  • One-shot Lubrication for Apron, Carriage, and Bed Ways
  • Multi-position Adjustable Feed Position Stops
  • Dual Inch/Metric Calibrated Tailstock Quill with Knockout Tang; Heavy Duty Two Speed Tailstock
  • Dual Inch/Metric Dials with Quick-change Sleeve

Request for Info



Specifications

Specification ML-1740TMLX-2060TCS-2280
Swing Over Bed 17" 20" 22"
Swing Over Cross Slide 11" 14" 14.2"
Swing Over Gap 24.5" 27.5" 30.7"
Width of Bed 12" 12" 13.2”
Distance Between Centers 44" 57" 86.5"
Cross Slide Travel 12" 12" 10.2"
Top Slide Travel 4.75" 4.75" 5"
Spindle Bore 3.15" 3.15" 3.15"
Spindle Speeds 12 12 12
Spindle Speed Range 36-1800 RPM 26-1500 RPM 25-1500 RPM
Through Hole Diameter 3.125" 3.125" 3.2"
Spindle Nose D1-6 D1-8 D1-8
Spindle Bore Taper MT#7 - MT#4 MT#5 MT#5
Thread – Standard (Whit-worth) 45 (2-72) TPI 45 (2-72) TPI 45 (2-72) TPI
Thread – Metric Pitch 39 (0.2-14) mm 39 (0.2-14) mm 39 (0.2-14) mm
Longitudinal Feed 0.0015"–0.04" in/rev 0.0015"–0.04" in/rev 0.0015"–0.04" in/rev
Cross Feed 0.00075"–0.02" in/rev 0.00075"–0.02" in/rev 0.00075"–0.02" in/rev
Lead Screw Diameter - - -
Threading Pitch - - -
Quill Travel 5" 5" 7"
Quill Diameter 2.3" 2.3" 2.95"
Quill Bore Taper MT#4 MT#4 MT#5
Main Motor 7.5 HP 10 HP 10 HP
Coolant Pump Motor 1/8 HP 1/8 HP 1/8 HP
Machine Dimension - - -
Packing Dimension 88" x 42" x 66" 115" x 39" x 63" 138" x 39" x 61"
Machine weight 3850 LBS 4560 LBS -
Packing weight 4510 LBS 5450 LBS -

Accessories

Standard Accessories

  • 3-jaw chuck (10”)
  • Chuck cover with interlock
  • Steady rest & Follow rest
  • Main leadscrew cover
  • 4-position tool post
  • Coolant system
  • Full length splash guard
  • Halogen work light
  • Thread chasing dial
  • 3 position carriage stop
  • Bed mount carriage stop
  • Electric cabinet interlock switch

Optional Accessories

  • 4-jaw chuck
  • Digital Readout System (View Brochure)
  • Royal spindle type live center
  • BTC 3-jaw chuck with back plate (Zero-set)
  • Taper turning attachment
  • Rustlick coolant
  • Micro carriage stop

Brochures

Title: Kent USA Precision Lathes

Request for Info