• Guaranteed Circular Accuracy to 50 millionths of an inch
  • Fanuc 0i-Mate TD Control Standard (Opt. Fagor 8055i CNC Control)
  • Powerful 3 HP motor (5HP-Optional) with Yaskawa current vector inverter drive for improved torque response at low end.
  • Spindle mounted on high precision preloaded angular contact ball bearings
  • Precision ballscrew on X, Z-axes
  • Protection guard on Z-axis ballscrew
  • X, Z-axes feeds driven by AC Servo Motor
  • X, Z-axes ballscrews directly coupled to AC Servo Motor, minimizing backlash
  • Solid one-piece enclosed headstock has high precision preloaded ball bearing spindle with 5C collet capacity
  • Solid full bearing tailstock that supports any load to the preloaded ball bearing spindle headstock
  • STEP CHUCKS – exceptionally useful for accurately holding work up to 6″ in diameter. Castings, moldings, stampings, and machined parts can be held rigidly and accurately.
  • STEP CHUCKS AND CLOSERS – carried in stock in 2″, 3″, 4″, 5″ and 6″ rated sizes. All step chucks are supplied with pinholes in place for precision machining.
  • CHUCK CLOSERS – fit directly to the machine spindle. A taper corresponding to that on the periphery of the step chuck places the closing pressure over the stepped area of the chuck, resulting in greater gripping power and accuracy.
  • Fast Lever Collet Chucking
  • Power Collet Closer (Air-Operated  Automatic Chucking)
  • Optional Gang Tooling
  • Wide variety of accessories to increase versatility




Specification CT-1118
Swing Over Bed 11"
Swing Over Cross Slide 6"
Distance Between Centers 18"
Through 5C collet bore 1.0625"
Spindle taper ID/OD 5C (10 degree) / 4 degree taper
Spindle Speeds 25-4000 RPM
Spindle Bore 1.5"
Tailstock Spindle Taper M.T. #2
Tailstock Spindle Travel 3.75"
Longitudinal Travel (Z axis): 13.5"
Cross Slide Travel (X axis) 6.25"
Rapid Traverse Speed (Z Axis) 800"/min
Rapid Traverse Speed (X Axis): 800"/min
Spindle Motor 3 HP
AC Servo Motor (Z Axis) 0.66 HP
AC Servo Motor (X Axis) 0.66 HP
Coolant Motor 1/8 HP
Net Weight 2200 lbs
Gross Weight 2420 lbs
Dimension 81" x 40" x 65"
Packing Dimension 87" x 47" 84.6"


Standard Accessories

  • Fanuc 0i-Mate TD Control (Opt. Fagor 8055i CNC Control)
  • AC Frequency Drive Spindle
  • Auto-Lubrication Unit
  • Flood Coolant System


KENT USA CT-1118 CNC Lathe-Floor Plan

Optional Accessories

  • Full Polycarbonate Sheet Safety Guard
  • Power Collet Closer
  • Gang Tool Holders


CT-1118 CNC Precision Lathe: Overview

Request for Info