TW-40Qi/MCO

Features

  • 7.5 HP (MCO Model: 10 HP) AC Frequency Drive Spindle Motor
  • MCO Model: 20 tools carousel ATC
  • Meehanite GB300 casting for superior rigidity
  • Hardened and Ground Square Y and Z-axis ways
  • Hardened and Ground table top and dovetail ways
  • Precision Ground ballscrews on X, Y and Z-axis
  • Ultra precision ground spindle, ABEC-7 bearings
  • Hardened and Ground spindle spline and taper
  • Large Cabinet with shelves for Tools storage
  • Auto Lube system with metered Check valves
  • Metal telescoping way cover on Y-axis
  • Built in Coolant system and Chip pan
  • Halogen work light
  • Handwheels on x & Y axis for manual operation

   

Specifications

Specification TW-32QiTW-40Qi/MCOTW-50MCO
Table Size 12" x 50" 13" x 59" 18" x 68"
Table Travel (X-Axis) 34" (32" w/ control) 40" (38" w/ control) 50" (48" w/ control)
Saddle Travel (Y-Axis) 20" (18.5" w/ control) 21" (20" w/ control) 21" (20" w/ control)
Vertical Travel (Z-Axis) 20" (18.5" w/ control) 22" (20" w/ control) 22" (20" w/ control)
Spindle Center to Column 20" 21.3" 21.3"
Spindle to Table 4" to 24" 4" to 24" 3.54" to 27.16"
Quill Travel 5.5" 5.5" -
Quill Diameter 4.173" 4.173" -
T-Slots (number x width) 3 x 5/8" 3 x 5/8" 3 x 5/8"
Coolant Pump 0.25 HP 0.25 HP 0.25 HP
Spindle Motor 7.5 HP 7.5 HP 10 HP (7.5 HP for Fanuc System)
Spindle Taper NST-40 or CAT-40 NMTB-40 CAT 40 (Opt. BT-40)
Speed Range 60-6000 RPM 60-6000 RPM 70-8000 RPM
Quill Power Feed (per rev) 0.0017" / 0.0032" / 0.0054" 0.0017" / 0.0032" / 0.0054" -
Drilling Capacity (Manual) 1.25" 1.25" -
Drilling Capacity (Power) 0.625" 0.625" -
Boring Capacity 8" Diameter 8" Diameter 8" Diameter
Milling Capacity 2.5 in³/min 2.5 in³/min 2.5 in³/min
Maximum Work Load 1000 lbs (distributed) 1400 lbs 1760 lbs
Net Weight 4200 lbs 6050 lbs 7700 lbs
Gross Weight 4500 lbs 6350 lbs 8500 lbs
Packing Dimension 72" x 86" x 88" 79" x 76" x 98" 112" x 90" x 99"
Power Requirements 220 volts, 60 Hz, 3-phase, 30 Amps 220 volts, 60 Hz, 3-phase, 45 Amps 220 volts, 60 Hz, 3-phase, 60 Amps

Accessories

Standard Accessories

  • Acu-Rite 3500i CNC (3-axis, LCD Display)

Optional Accessories

  • MPG hand wheel jog box (3500i)
  • Off-line software (3500i)
  • Fagor 8055i CNC Control
  • Air Powered Drawbar
  • Clamping Kit
  • NMTB-40 End Mill Adapters
  • Angle-Lock Vise
  • Rotary Table
  • Rustlick G25 Coolant

Brochures

Title: Kent-USA-Bed-Mills-Full-Line

Request for Info