TRL-1340/V

Features

  • Heaviest duty 13” lathe in its class
  • 5 HP main spindle motor
  • 16 speeds, geared headstock (TRL-1340) (50 – 2570 RPM)
  • Infinitely variable speed in Hi/Low geared speed ranges (TRL-1340V) (100-500-3000 RPM)
  • Jog button for easy gear changes
  • Hardened and ground gears and bedways
  • Cast iron machine bedways and base
  • Removable chip pan for easy clean up
  • Foot brake and T-Slot compound
  • Inch/metric reading on dials
  • Inch/metric ruler on tailstock quill
  • ISO 9001 certified manufacturer

   

Specifications

Specification SSM-1340BVTRL-1340/VRML-1440VT
Swing Over Bed 13" 13-3/8" 14-3/16"
Swing Over Cross Slide 8-1/4" 8-1/4" 8-3/8"
Swing Over Gap 18-1/2" 20" 21"
Width of Bed 7-1/2" 9” 10-1/4"
Distance Between Centers 40" 40" 40"
Cross Slide Travel 6-3/4" 7" 8-11/16"
Top Slide Travel 3-1/2" 4" 5-1/2"
Spindle Bore 1.5" 1.5" 2.1"
Spindle Speeds 2 16 2
Spindle Speed Range 40-365 & 218-2000 RPM 50-2570 RPM 20-400-2500 RPM
Through Hole Diameter 1-9/16" 1-9/16" 2-1/16"
Spindle Nose ASA D1-4 Camlock ASA D1-4 Camlock D1-6 Camlock
Spindle Bore Taper MT#5 MT#5 MT#6
Thread – Standard (Whit-worth) 34 (2-56) TPI 45 (2-72) TPI 45 (2-72) TPI
Thread – Metric Pitch 33 (0.5-12) mm 39 (0.2-14) mm 39 (0.2-14) mm
Longitudinal Feed 0.0016"–0.046" 0.002"–0.067" 0.002"–0.067"
Cross Feed 0.0005”-0.015” 0.001"–0.0375" 0.001”-0.034” in/rev
Lead Screw Diameter 7/8" 1-1/8" 1-1/8"
Threading Pitch 8 TPI 4 TPI 4 TPI
Quill Travel 4" 4" 6.5"
Quill Diameter 1-9/16" 2" 2"
Quill Bore Taper MT#3 MT#3 MT#4
Main Motor 3 HP 5 HP 5 HP
Coolant Pump Motor 1/8 HP 1/8 HP 1/8 HP
Machine Dimension 74" x 28" x 54" 81.5" x 32" x 56" 81" x 36" x 60"
Packing Dimension 77" x 30" x 60" 90" x 37" x 60" 87" x 42" x 66"
Machine weight 1320 LBS 2200 LBS 3190 LBS
Packing weight 1584 LBS 2440 LBS 3630 LBS

Accessories

Standard Accessories

  • 3-jaw chuck (7″)
  • Steady rest
  • Follow rest
  • 4-position tool post
  • Coolant system
  • Full-length splash guard
  • Worklight
  • Chuck cover
  • Thread chasing dial
  • Toolbox with standard tools

Optional Accessories

  • 4-jaw chuck (8″)
  • Digital Readout System (View Brochure)
  • Royal spindle type live center
  • BTC 3-jaw chuck with back plate
  • Taper turning attachment
  • Rustlick coolant

Brochures

Title: Kent USA Precision Lathes

Videos

TRL-1340 Manual Precision Lathe: Operation

Request for Info