KLS-1860V

Features

  • 7.5 HP main spindle motor, 2 speed ranges with infinitely variable speed
  • D1-8 camlock, 3.1” spindle bore
  • Hardened and ground gears and bedways
  • Jog button, multi-position feed stops
  • Inch dials and leadscrews
  • Centralized lube system in headstock
  • Safety Foot brake

   

Specifications

Specification KLS-1860GKLS-1860VKLS-2280C
Swing Over Bed 18" 18" 22"
Swing Over Cross Slide 10.8" 10.8" 12.5"
Swing Over Gap 27.2" 27.5" 30"
Width of Bed 12" 13" 16"
Distance Between Centers 60" 60" 80"
Cross Slide Travel 11.4" 11" 10.2"
Top Slide Travel 4.7" 4" 5.75"
Spindle Speeds 12 12 12
Spindle Speed Range 25-2000 RPM 200-2000 RPM 36-1600 RPM
Through Hole Diameter 3.2" 3.2" 4.12"
Spindle Nose D1-8 D1-8 Camlock D1-8 Camlock
Spindle Bore Taper MT#5 w/ sleeve MT#7 w/ sleeve MT#6
Thread – Standard (Whit-worth) 4-112 (50NOS) 61 (1-5/8 to 72) tpi 32 (2–28) TPI
Thread – Metric Pitch 24 (0.25 to 7) mm 28 (0.5 to 20) mm 18 (1.25–14) mm
Longitudinal Feed 0.003"-0.0112" (0.01mm-0.286mm) 0.0015”-0.0913” in/rev 0.0024”-0.0992” in/rev
Cross Feed 0.003"-0.0112" (0.01mm-0.286mm) 0.0006”-0.0365” in/rev 0.0011”-0.042” in/rev
Lead Screw Diameter 1.38" 1.4" 1-9/16"
Threading Pitch 4 TPI 4 TPI 2 TPI
Quill Travel 4.7" 5" 6"
Quill Diameter 2.36” 3” 2.9"
Quill Bore Taper MT#4 MT#5 MT#5
Main Motor 7.3 HP 7.5 HP 10 HP (3-phase)
Coolant Pump Motor 1/8 HP 1/8 HP 1/8 HP (3-phase)
Machine Dimension 100" x 36" x 51" 112" x 40" x 50" 137" x 45" x 57"
Packing Dimension 114" x 39" x 64" 120" x 45" x 72" 143" x 55" x 84"
Machine weight 4542 lbs 5830 lbs 7260 lbs
Packing weight 5093 lbs 6380 lbs 7760 lbs

Accessories

Standard Accessories

  • 3-jaw chuck (10”), 4-jaw chuck (10”)
  • Face plate (16”),Steady rest (3.5”), Follow rest (1-3”)
  • 4-way tool post, thread chasing dial
  • Coolant system, Full length splash guard
  • Worklight, standard tools

Optional Accessories

  • DRO system (Acu-Rite, Newall, etc.) (View Brochure)
  • DRO installation charge
  • Aloris CA #4-set (tool post plus 6 bars)
  • 5C lever style collet closer
  • Royal spindle type live center (M.T. #5)
  • BTC 3-jaw chuck w/back plate (Zero-set, 10” D1-8)
  • BTC 3-jaw chuck w/back plate (Zero-set, 12” D1-8)
  • Taper turning attachment
  • Rustlick coolant (1 gallon, mixes 1:30)

Request for Info