S-1500

  • 10 HP AC Servo Spindle Motor
  • Meehanite casting for superior rigidity
  • Hardened and Ground Square Y and Z-axis ways
  • Hardened and Ground table top and dovetail ways
  • Precision Ground ballscrews on X, Y and Z-axis
  • Ultra precision ground spindle, ABEC-7 bearings
  • Hardened and Ground spindle spline and taper
  • Auto Lube system with metered Check valves
  • Metal telescoping way cover on Y-axis
  • Built in Coolant system and Chip pan
  • Halogen work light

Request for Info



Specifications

Specification TW-50MCOS-1500S-2000
Table Size 18" x 68" 24" x 73" 30" x 92"
Table Travel (X-Axis) 50" (48" w/ control) 60" 78.7"
Saddle Travel (Y-Axis) 22" (20" w/ control) 27" 32"
Knee Travel (Z-Axis) 22" (20" w/ control) 28" 28"
Spindle Center to Column 22" 30.5" 35"
Spindle to Table 3.54" to 23.16" 3" to 31" 3" to 31"
T-Slots (number x width) 3 x 5/8" 3 x 5/8" 3 x 5/8"
Coolant Pump 0.25 HP 0.25 HP 0.25 HP
Spindle Motor 10 HP (7.5 HP for Fanuc System) 10 HP 15 HP
Spindle Taper CAT 40 (Opt. BT-40) CAT 40 (Opt. BT-40) CAT 40 (Opt. BT-40)
Speed Range 70-8000 RPM 80-6000 RPM 80-6000 RPM
Maximum Work Load 1760 lbs 3300 lbs 3960 lbs
Net Weight 7700 lbs 9900 lbs 16500 lbs
Gross Weight 8500 lbs 10890 lbs 18150 lbs
Packing Dimension 112" x 90" x 99" 122" x 92" x 110" 152" x 96" x 110"
Power Requirements 220 volts, 60 Hz, 3-phase, 60 Amps 220 volts, 60 Hz, 3-phase, 70 Amps 220 volts, 60 Hz, 3-phase, 70 Amps

Accessories

Standard Accessories

  • 20 Tools Carousel ATC
  • Auto-Lubrication Unit
  • Flood Coolant System

Optional Accessories

  • MPG Handheld Jog Box
  • Clamping Kit
  • CAT 40 End Mill Adapters
  • Rustlick G25 Coolant
  • Angle-Lock Vise
  • Rotary Table
  • Full Enclosure

Brochures

Title: Kent-USA-Bed-Mills-Full-Line

Request for Info