LA-34 Series

Features

  • Rigid one piece headstock casting design
  • Electromagnetic brake
  • 18-step speeds for higher torque
  • Auto-lubrication system
  • Cross slide on ballscrews
  • Laser inspected bed
  • Single piece Meehanite bed casting
  • Shafts and gears are hardened and ground to HRC 45±2
  • Optional double chucks for longer workpieces

   

Specifications

Specification LA-30 SeriesLA-34 SeriesLA-38 Series
Swing Over Bed 30" 34" 38"
Swing Over Cross Slide 20.5" 24.4" 28.3"
Swing Over Gap 42.1" 46" 50"
Width of Bed 20" 20" 20"
Distance Between Centers 60" (Opt. 80", 120", 160", 200") 60" (Opt. 80", 120", 160", 200") 60" (Opt. 80", 120", 160", 200")
Cross Slide Travel 11.02" 11.02" 11.02"
12"
Spindle Bore 4" (Opt. 6") 6" (Opt. 9", 12") 9" (Opt. 12", 14")
Spindle Nose A2-8 A2-11 (Opt. A2-15) A2-15 (Opt. A2-20)
18 18
5 – 670 RPM (Opt. 4 – 500 RPM) 4 – 500 RPM (Opt. 4 – 440 RPM)
6"
MT#5 (Opt. MT#6) MT#6
30 – 0.25 TPI 30 – 0.25 TPI
1 – 120 mm 1 – 120 mm
0.0032 – 0.096 ipr 0.0032 – 0.096 ipr
0.0016 – 0.048 ipr 0.0016 – 0.048 ipr
5.9" (Opt. 7.9") 5.9" (Opt. 7.9")
Quill Diameter 4.9" (Opt. 6.5") 4.9" (Opt. 6.5") 4.9" (Opt. 6.5")
Main Motor 20 HP (30 HP Optional Accessory) 20 HP (Opt. 30 HP) 20 HP (Opt. 30 HP)
1/8 HP 1/8 HP
127" – 265" x 43" x 62" 127" – 265" x 43" x 66"
Gross Weight 13100 – 26500 lbs 13800 – 27000 lbs 14450 – 29750 lbs

Accessories

Standard Accessories

  • 3-jaw chuck (15″)
  • Steady rest
  • Follow rest
  • Thread chasing dial
  • 4-position tool post
  • 4-position carriage stop
  • Coolant system with full-length splash guard

Optional Accessories

  • Digital Readout System
  • Aloris DA #5-SET (Tool post and 6 holders)
  • Royal spindle type live center
  • BTC 3-jaw chuck with back plate (Zero-set, 15″ D1-11)
  • Adaptor plate and rear 12″ 3 jaw chuck for back of spindle
  • Face plate (20″ D1-11)
  • Taper turning attachment
  • Micrometer carriage stop

Brochures

Title: Kent USA Heavy Duty Lathes Brochure

Videos

Kent USA Large Lathes Series

Request for Info