HL-44 Series

  • 20 HP Spindle Motor, 16-Speeds
  • 5.98” Spindle Through Hole
  • Extra Heavy Ribbed One Piece Bedways and Base
  • Spindle Jog Button Control
  • One-shot Lubrication for Apron, Carriage, and Bed Ways
  • Two Speed Tailstock
  • Magnetic Clutch Brake
  • 4 Way Rapid Feed

Request for Info



Specifications

Specification HR-35 SeriesHL-37 SeriesHL-44 Series
Swing Over Bed 34.6" 37.8" 44"
Swing Over Cross Slide 25.2" 14.2" 17.3"
Swing Over Gap 46" 54-3/8" 61"
Width of Bed 19" 24” 24”
Distance Between Centers 120" (Opt. 80" / 160" / 200") 120" (Opt. 80" / 160" / 200" / 240" / 280" / 320") 120" (Opt. 80" / 160" / 200" / 240" / 280" / 320")
Cross Slide Travel 17.32" 13.78" 13.78"
Top Slide Travel 9.4" 16 16
Spindle Speeds 12 4-420 RPM 4-420 RPM
Spindle Speed Range 14-1000 RPM 5.98" 5.98"
Through Hole Diameter 4.1" (Opt. 6.1") ASA A2-11 ASA A2-11
Spindle Nose D1-11 or A1-11 ASA A2-11 ASA A2-11
Spindle Bore Taper MT#7 - MT#5 - -
Thread – Standard (Whit-worth) 45 (2-72) TPI 1-120 1/4-30 TPI 1/4-30 TPI
Thread – Metric Pitch 39 (0.2-14) mm 1-120 mm 1-120 mm
Longitudinal Feed 0.002"–0.0276" in/rev 0.002"–0.0276" in/rev 0.002"–0.0276" in/rev
Cross Feed 0.001"–0.00138" 0.001"–0.00138" 0.001"–0.00138"
Quill Travel 12" 12" 12"
Quill Diameter 4.133" 4.5" 4.5"
Quill Bore Taper MT#6 MT#6 MT#6
Main Motor 20 HP 20 HP 20 HP
Coolant Pump Motor 1/8 HP 1/8 HP 1/8 HP
Packing Dimension 198" x 69" x 73" 200" x 61" x 66" 137" / 186" / 219" x 41" x 52"

Accessories

Standard Accessories

  • Steady rest
  • Work light
  • Thread chasing dial
  • Follow rest
  • 4-position tool post
  • Coolant system

Optional Accessories

  • Digital Readout System
  • Chuck cover
  • 3-jaw chuck (20″)
  • 4-jaw independent chuck (32″ or 40″)
  • 9″ / 12″ spindle bore
  • Face plate
  • Royal spindle type live center
  • Taper turning attachment
  • Rear of spindle chuck adapter plate for 32″ 4-jaw chuck
  • BTC 3-jaw chuck with back plate
  • Micrometer carriage stop
  • Rustlick coolant

Brochures

Title: Kent USA HL HK Lathe (Email)

Request for Info