JY-VH650B

Features

  • 10 HP spindle motor infinitely variable speed, #50 taper spindle, 24” x 87” hardened and ground table top
  • Saddle and base with hardened and ground square (box) ways
  • Precision ACME screws in X, Y, & Z axes
  • X, Y, & Z axes driven by AC motor
  • Precision bored and ground milling head, with super precision ABEC-7 bearings
  • Meehanite® casting, with built in coolant reservoir in machine base
  • Coolant system and chip tray
  • Centralized automatic lubrication, with metered check-valves
  • Precise angular contact bearings spindle
  • Precision manufactured from SCM21 alloy steel, heat treated and  precision ground spindle
  • Hardened and precision ground for quiet running gears
  • High torque servo motor X-axis feed
  • Choice of Fanuc or Mitsubishi CNC controller
  • Hardened, precision ground, and Turcite-B coated sideways for maximum wear resistance
  • Convertible into CNC controlled system

   

Specifications

Specification JY-VH550JY-VH650BJY-VH780
Table Size 17" x 75" 24" x 87" 28" x 102"
Table Travel (X-Axis) 51.2" 67" 78.7"
Saddle Travel (Y-Axis) 35.4" 41.3" 41.3"
Knee Travel (Z-Axis) 31.5" 37.4" 39.4"
T-Slot 0.74" x 0.2" x 3.15" (18 x 5 x 80mm) 0.98" x 0.2" x 4.92" 0.79" x 0.2" x 4.92" (20 mm x 5 x 125 mm)
X, Y, Z Feedrate 1.18"/min - 110"/min 1.2"/min - 110"/min 1.2"/min - 110"/min
X, Y, Z Rapid Feedrate 110"/min 110"/min 110"/min
Spindle Motor 10 HP 10 HP (Opt. 15 HP) 10 HP (Opt. 15 HP)
Vertical Spindle Speed 45 - 1500 RPM (variable) 45 - 1500 RPM (variable) 45 - 1500 RPM (variable)
Vertical Spindle Taper NT-50 NT-50 NT-50
Spindle Nose to Table 0 - 24" 0 - 30" 0 - 31.6"
Spindle Center to Column 21.7" 26" 30.7"
Horizontal Spindle Speed 45 - 1500 RPM (variable) 45 - 1500 RPM (variable) 45 - 1500 RPM (variable)
Horizontal Spindle Taper NT-50 NT-50 NT-50
Spindle Center to Table -0.39" - 31.88" -0.4 – 37.6”(-10mm~940mm) -0.4 – 38.9”
Spindle Nose to Rear 11.42" 11.6" 11.6"
Maximum Work Load 3300 lbs 4400 lbs 4400 lbs
Machine Net Weight 13228 lbs 16500 lbs 33069 lbs
Shipping Weight 15433 lbs 18700 lbs 35275 lbs
Dimensions 110" x 100" x 112" 139" x 138" x 121" 155" x 130" x 135"

Accessories

Standard Accessories

  • Cooling System
  • Tool Box
  • Spindle Draw Bar Screw
  • Leveling Pad
  • Adjustment Bolt

Optional Accessories

  • Dro System
  • Air Power Drawbar (Per Spindle)
  • Angle-Lock Vice
  • Rotary Table (Vertical and Horizontal)
  • Clamping Kit
  • Chuck System
  • Rustlick Coolant (1 Gal, Mixes 1:30)

Brochures

Title: Kent USA JY Series Combination Mills

Request for Info