KUG-35100H/NC

Features

Nitride hardened, super-finished spindle
Variable speed workhead rotates 90° CCW and 30° CW
Rapid advance and retract of wheel head allows for quicker setup and check of grind-in dimensions
Hydraulically driven longitudinal traversal
Manual infeed for H model; manual and automatic infeed with plunge cycle on NC model
Advanced Hydrostatic Lubrication System

Specification	KUG-2760H/NC	KUG-3560H/NC	KUG-35100H/NC
Max. Grinding Length	23.6"	23.6"	40"
Max. Work Swings	10.6"	13.7"	13.8"
Max. Load Between Centers	154 LBS	154 LBS	286 LBS
Max. External Grinding Diameter	Ø 9.8″	Ø 13″	Ø 13″
Grinding Wheel O.D. x Width x I.D.	16″ x 2″ x 5″	16″ x 2″ x 5″	16″ x 2″ x 6″
Grinding Wheel Speeds (2 Range Pulley) RPM	1500 RPM, 1600 RPM	1500 RPM, 1600 RPM	1500 RPM, 1600 RPM
Workhead Spindle Swivel Angle	120°	120°	120°
Workhead Spindle Center Taper	M.T. #4	M.T. #4	M.T. #4
Workhead Spindle Spindle Rotation	Forward & Reverse	Forward & Reverse	Forward & Reverse
Workhead Spindle Speed Range	11-500 RPM	11-500 RPM	11-500 RPM
Tailstock Taper	M.T. #4	M.T. #4	M.T. #4
Table Swivel Angle	-11°, +6°	-11°, +6°	-11°, +6°
Table Traverse Speed	1.96"-157"/min	1.96"-157"/min	1.96"-157"/min
Worktable Min Travel	0.31"	0.31"	0.31"
Hand Wheel Feed/Revolution	0.79"	0.79"	0.79"
Wheel Spindle Motor	5 HP / 4 P	5 HP / 4 P	5 HP / 4 P
Workhead Spindle Motor	0.5 HP / 4 P	0.5 HP / 4 P	0.5 HP / 4 P
Hydraulic Pump Motor	2 HP / 4P	2 HP / 4P	2 HP / 4P
Wheel Spindle Lubrication Pump Motor	1/4 HP / 4 P	1/4 HP / 4 P	1/4 HP / 4 P
Coolant Pump Motor	1/4 HP / 4 P	1/4 HP / 4 P	1/4 HP / 4 P
Internal Grinding Spindle Motor	2 HP / 2 P	2 HP / 2 P	2 HP / 2 P
X Servo Motor	1.3 HP	1.3 HP	1.3 HP
Y Servo Motor	2 HP	2 HP	2 HP
Wheel Spindle Lubricant Tank	5.8 Gal.	5.8 Gal.	5.8 Gal.
Hydraulic Fluid Tank	15.9 Gal.	15.9 Gal.	15.9 Gal.
Coolant Tank	26.5 Gal.	26.5 Gal.	26.5 Gal.
Net Weight	6930 lbs	6930 lbs	9240 lbs
Packing Dimensions	110" x 65" x 72"	110" x 65" x 72"	173" x 65" x 72"

Title: KUG Series Cylindrical Grinders (Print)

Download