KTM-VH300EVS

Features

  • Turret type inverter / variable speed head
  • 5 HP horizontal spindle motor, 6 speed ranges. 5 H.P. vertical spindle motor, 50″ x 14.6” hardened and ground table top
  • Saddle and knee with hardened and ground square (box) ways
  • Precision ballscrews in X & Y axes
  • X & Y axes driven by AC servo motor
  • Precision bored and ground milling head, with super precision ABEC-7 bearings
  • Meehanite® casting, with built in coolant reservoir in machine base
  • Coolant system and chip tray
  • Centralized automatic lubrication, with metered check-valves

   

Specifications

Specification KTM-VH300EVSKTM-VH500EVSKTM-VH600EVS
Table Size 50" x 14.6" 50" x 14.6" (Opt. 57.9" x 14.6") 50" x 14.6" (Opt. 57.9" x 14.6")
Table Travel (X-Axis) Manual 36.6" / Auto 36.2" Manual 36.6" / Auto 36.2" 36.6"
Saddle Travel (Y-Axis) Manual 15.7" / Auto 14.96" Manual 20.4" / Auto 19.7" 24"
Knee Travel (Z-Axis) Manual 17.7" / Auto 16.5" Manual 16.5" / Auto 16.5" 17.3"
T-Slot 16 x 3 x 80 18 x 3 x 80 18 x 3 x 80
Feed (Long) / min 0.97"~12.6" (6 Steps) 1.18" ~ 118.11" Variable 1.18" ~ 118.11" Variable
Feed (Cross) / min 40.9" 1.18" ~ 118.11" Variable 1.18" ~ 118.11" Variable
Vertical / min 14.17" 37.8" (1.18" ~ 45.3" Variable Opt.) 37.8" (1.18" ~ 45.3" Variable Opt.)
Steps Variable Inv. Variable Inv. Variable
Spindle Speed RPM 75~3166 60~3600 60~3600
Swiveling Angle 45° (R&L) 45° (R&L) 45° (R&L)
Quill Travel 5.51" 5.51" 5.51"
Quill Feeds / Rew 0.0014" / 0.0028" / 0.0055" 0.0014" / 0.0028" / 0.0055" 0.0014" / 0.0028" / 0.0055"
Spindle Nose to Table 3.7" ~ 21.4" 3.35" ~ 19.88" 3.86" ~ 21.2"
Spindle Center to Column Face 7.5" ~ 27" 7.28" ~ 30.9" 7.28" ~ 30.9"
Cross Travel of Ram 19.69" 23.6" 23.6"
H. Spindle Nose N.S.T. 40 N.S.T. 40 N.S.T. 50
H. Spindle Speed RPM 60 ~ 1440 60 ~ 1440 60 ~ 1440
H. Steps 9 9 9
H. Spindle to Bottom of Ram 6.89" 6.89" 6.89"
H. Spindle Center to Table Top 0" ~ 17.7" -0.31" ~ 17" -0.31" ~ 17"
V. Spindle Motor 5 HP / 4P Inv. 5 HP / 4P Inv. 5 HP / 4P Inv.
H. Spindle Motor 5 HP / 4P 5 HP / 4P 7.5 HP / 4P
X, Y Axis Feed 3/4 HP / 4P, 1/2 HP /4P - 1/5 AC Servo 1 HP AC Servo 1 HP
Z Axis Feed 1/2 HP - 4P - 1/10 1 HP / 12P (AC Servo 1.14HP Opt.) 1 HP / 12P (AC Servo 1.14HP Opt.)
Coolant Pump 1/8 HP / 2P 1/8 HP / 2P 1/8 HP / 2P
Dimensions (L x W x H) 68.5" x 63.5" x 79" 81.5" x 75" x 102" 81.5" x 81" x 103"
Net Weight 5401 lbs 5842 lbs 5952 lbs

Accessories

Standard Accessories

  • Coolant System
  • X, Y Axes Servo Motor
  • X, Y Axes Ball Screw
  • Vertical Head Auto Lubrication Pump
  • Slideway Auto Lubrication Pump
  • Y-Axis Inverter Movement with Ball Screw

Optional Accessories

  • X-Axis Ball Screw with Inverter Movement
  • Vertical Head Attachment
  • Turret Head Inverter Motor with Controller
  • Air Power Drawbar
  • Table Size Opt. 57.9″ x 14.6″

Brochures

Title: Kent USA KTM Combination Mills

Request for Info