SGS-T6012AHD

  • High tensile precision GB350 Meehanite castings
  • Full featured NC electronic control on Z axis
  • Precision hand scrapped double V turcite table ways for smooth and long lasting precision
  • Centralized automatic lubrication system provides lubrication to all points
  • Safety 24V control circuit power

Request for Info



Specifications

Specification SGS-T4012AHDSGS-T5012AHDSGS-T6012AHD
Working Capacity 47.2" x 157.5" 47.2" x 196.9" 47.2" x 236.2"
Grinding Surface 51.2” x 161.4" 63” x 197" 63” x 236"
Horizontal Travel 165.4" 204.7" 244.1"
Distance Between Two Columns 63" (Opt. 75") 63" (Opt. 75") 63" (Opt. 75")
Distance Between Table Surface and Spindle Center 45.3" 45.3" 45.3"
Inclination of Universal Head ±90° ±90° ±90°
Table Speed 16 ~ 80 ft/m (5 ~ 25M/min) 16 ~ 80 ft/m (5 ~ 25M/min) 16 ~ 80 ft/m (5 ~ 25M/min)
Automatic Crossfeed of Spindle Seat (60 Hz) 0 ~ 1" 0 ~ 1" 0 ~ 1"
Downfeed Handwheel Min Scale 0.0002" 0.0002" 0.0002"
Crossfeed Handwheel (1 gra) 0.001" 0.002" 0.002"
Crossfeed Handwheel (1 rev) 0.2" 0.2" 0.2"
Longitudinal Travel 165.4" 208.7" 248"
Crossfeed Travel 55.1" 55.1" 55.1"
Spindle Motor (H. Axle) 20HP x 4P (Opt. 30P x 4P) 20” x 2” x 5” * 20” x 3” x 8” 20HP x 4P (Opt. 30P x 4P)
Spindle Motor (V. Axle) 10HP x 4P (Opt. 15HP x 4P) 10HP x 4P (Opt. 15HP x 4P) 10HP x 4P (Opt. 15HP x 4P)
Hydraulic Pump Motor 20 HP x 6P 30 HP x 6P 30 HP x 6P
Crossfeed Motor AHD:1/4 HP x 6P (PNC: AC Servo) AHD:1/4 HP x 6P (PNC: AC Servo) AHD:1/4 HP x 6P (PNC: AC Servo)
Downfeed Motor DC Servo AC Servo AC Servo
Grinding Wheel (OD x T x ID) (H. Axle) AHD: 20" x 50 x 5" (PNC: 20" 75 x 8") (1250 RPM 60/50 Hz) AHD: 20" x 50 x 5" (PNC: 20" 75 x 8") (1250 RPM 60/50 Hz) AHD: 20" x 50 x 5" (PNC: 20" 75 x 8") (1250 RPM 60/50 Hz)
Grinding Wheel (OD x T x ID) (V. Axle) 16" x 50 x 5" (1750 RPM / 1450 RPM) 16" x 50 x 5" (1750 RPM / 1450 RPM) 16" x 50 x 5" (1750 RPM / 1450 RPM)
Flow Rate of Coolant Pump 200 L/min 200 L/min 200 L/min
Max Load Capacity 17640 lbs 23150 lbs 26455 lbs
Net Weight 79340 lbs 92595 lbs 105830 lbs
Dimensions 389" x 224" x 156" 563" x 225" x 156" 650" x 225" x 156"

Accessories

Standard Accessories

  • Toolbox with tools
  • Wheel flange
  • Wheel balancing base
  • Wheel balancing arbor
  • Grinding wheel
  • Flange extractor
  • Diamond dresser
  • Diamond dresser base
  • Work light

Optional Accessories

  • Coolant equipment
  • Dust suction equipment
  • Cooling & dust suction equipment
  • Coolant equipment with paper filter & magnetic separator
  • Manual type overhead parallel dressing attachment
  • Hydraulic type overhead parallel dressing attachment
  • Permanent magnetic chuck
  • Electromagnetic chuck
  • Inclinable electromagnetic chuck
  • Angle forming attachment
  • Radius forming attachment
  • Sine bar
  • Precision vise
  • Electrodemagnetized equipment

Brochures

Title: Double Column Grinders Brochure 2020 (Print)

Videos

Kent USA Double Column Grinder Walk Around

Kent USA Double Column Grinders

Request for Info