SGS-816MR
Features
- 8”x16” working capacity
- Downfeed dial graduated in 0.0001”
- Roller ball on linear table ways for easy and smooth longitudinal movements
- High column, 18” spindle center to table for extra clearance under the wheel
- 8” cross traverse for extra width and capacity, perfect for the mold shops
- Centralized automatic lubrication system provides lubrication to all points
- Safety 24V control circuit power
- Micro-downfeed and rapid elevation
Specifications
Specification | CGS-618M | SGS-816MR | KGS-1020 |
---|---|---|---|
Working Capacity | 6" x 18" | 8" x 16" | 10" x 20" |
Table Travel | 19" | 17" | 24.5" |
Saddle Travel | 6.69" | 8.25" | 12.5" |
T-Slot | 1 x 9/16" | 1 x 9/16” | 1 x 9/16” |
Spindle Motor | 3 HP | 2 HP | 3 HP |
Spindle Speed | 3450 RPM | 3450 RPM | 1750 RPM |
Grinding Wheel | 8” x 1/2” x 1-1/4” | 8” x 1/2” x 1-1/4” | 12" x 1" x 3" |
Vertical Graduation | 0.0002" | 0.00025" / 0.00005" | 0.0005" |
Vertical Revolution | 0.050" | 0.050" | 0.050" |
Spindle to Table | 18" | 18" | 21" |
Net Weight | 1600 lbs | 1540 LBS | 3256 LBS |
Gross Weight | 1800 lbs | 1860 LBS | 3800 LBS |
Accessories
Standard Accessories
- Grinding wheel
- Wheel Flange
- Wheel balancing base
- Wheel balancing arbor
- Diamond table dresser base & tip
- Leveling bolts & pads
- Work light
- Toolbox with tools
Optional Accessories
- Fine pole electric chuck & control
- Permanent chuck
- Dust-suction coolant system
- Flood coolant system
- Overhead parallel dresser
- Extra wheel flange
- Digital Readout System (View Brochure)
Brochures
Title: Kent USA Surface Grinders General