1-800-KENT-USA | sales@kentusa.com | Need Parts? Parts Store

HW-26 Series Manual Precision Lathe

Product Features

  • 15 HP spindle motor, 12-speeds
  • 4.5″ (115 mm) spindle through hole
  • Solid one piece full length casting base and bedways for maximum rigidity
  • Spindle jog button control
  • One-shot lubrication for apron, multi-position adjustable feed position stops
  • Dual inch/metric calibrated tailstock
  • Dual inch/metric dials

Standard Accessories

  • 3-jaw chuck (15″)
  • Steady rest
  • Follow rest
  • Thread chasing dial
  • 4-position tool post
  • 4-position carriage stop
  • Coolant system with full-length splash guard

Optional Accessories

  • Digital Readout System
  • Aloris DA #5-SET (Tool post and 6 holders)
  • Royal spindle type live center
  • BTC 3-jaw chuck with back plate (Zero-set, 15″ D1-11)
  • Adaptor plate and rear 12″ 3 jaw chuck for back of spindle
  • Face plate (20″ D1-11)
  • Taper turning attachment
  • Micrometer carriage stop

Specification Table

  • Swing Over Bed
  • Swing Over Cross Slide
  • Swing Over Gap
  • Width of Bed
  • Distance Between Centers
  • Cross Slide Travel
  • Top Slide Travel
  • Spindle Speeds
  • Spindle Speed Range
  • Through Hole Diameter
  • Spindle Nose
  • Spindle Bore Taper
  • Thread – Inches Pitch
  • Thread – Metric Pitch
  • Longitudinal Feed
  • Cross Feed
  • Quill Travel
  • Quill Diameter
  • Quill Bore Taper
  • Main Motor
  • Coolant Pump Motor
  • Packing Dimension
  • CS-2280

  • 22"
  • 14.2"
  • 30.7"
  • 13.2”
  • 86.5"
  • 10.2"
  • 5"
  • 12
  • 25-1500 RPM
  • 3.2"
  • D1-8
  • MT#5
  • 45 (2-72) TPI
  • 39 (0.2-14) mm
  • 0.0014"–0.04" in/rev
  • 0.00075"–0.02" in/rev
  • 7"
  • 2.95"
  • MT#5
  • 10 HP
  • 1/8 HP
  • 138" x 39" x 61"
  • HW-26 Series

  • 26"
  • 17.3"
  • 35"
  • 15.75"
  • 80" (Opt. 120" / 160")
  • 14.75"
  • 8"
  • 12
  • 10-1000 RPM
  • 4.5"
  • D1-11
  • MT#7
  • 44 (2-56) TPI
  • 39 (0.5-14) mm
  • 0.002"–0.032" in/rev
  • 0.001"–0.0094"
  • 6.5"
  • 3.3"
  • MT#5
  • 15 HP
  • 1/8 HP
  • 137" / 186" / 219" x 41" x 52"
  • HW-30 Series

  • 30"
  • 21.3"
  • 38.9"
  • 15.75"
  • 80" (Opt. 120" / 160")
  • 14.75"
  • 8"
  • 12
  • 10-1000 RPM
  • 4.5"
  • D1-11
  • MT#7
  • 44 (2-56) TPI
  • 39 (0.5-14) mm
  • 0.002"–0.032" in/rev
  • 0.001"–0.0094"
  • 6.5"
  • 3.3"
  • MT#5
  • 15 HP
  • 1/8 HP
  • 158" / 214" / 252" x 47" x 76"