1-800-KENT-USA | sales@kentusa.com | Need Parts? Parts Store

KTM-5VKF-E Manual Knee Mill

Product Features

  • 5 HP AC-Freq drive head with digital RPM display and analog load meter
  • 60-550-4500 spindle RPM (Hi/Low gear). Automatic spindle direction reversal when switching between high and low speed gear ranges
  • NMTB-40 spindle taper
  • Automatic centralized lubrication system with metered check-valves
  • Single-phase or 3-phase power without the need for a phase converter
  • Hardened and Ground (Hrc-52) table surface and all slide ways
  • Solid box ways on saddle and column

Optional Accessories

  • Quick change tooling package (Mach-1)
  • NMTB-30 spindle
  • Flood coolant system (Built-in base)
  • Knee (Z-axis) power feed
  • Air power drawbar
  • Flood coolant system
  • Chip tray
  • 3-D edge finder
  • Knee linear encoder feedback for coupled z-axis position
  • AMI with programmable M-functions

Specification Table

  • Table Size
  • Table Travel (X-Axis)
  • Saddle Travel (Y-Axis)
  • Knee Travel (Z-Axis)
  • Quill Travel
  • Ram Travel
  • Spindle Motor
  • Spindle Speed
  • Spindle Taper
  • Quill Diameter
  • Quill Feed Rate
  • Drilling Capacity (Manual/Power)
  • Boring Capacity
  • Milling Capacity
  • Maximum Work Load (Center)
  • Spindle Nose to Table Surface
  • Spindle Center to Column
  • Net Weight
  • Gross Weight
  • Shipping Dimensions
  • Power Requirements
  • KTM-4VKF-E

  • 12" x 50"
  • 33"
  • 18"
  • 15.25"
  • 5.5" (4" w/ MillPwr-3 CNC control)
  • 22"
  • 3 HP
  • 60–550–4500 RPM (60–6000* on HS head optional)
  • R-8
  • 3.375"
  • 0.0015" / 0.003" / 0.006" in/rev
  • 0.75" / 0.37" diameter
  • 6" diameter
  • 2.0 in³/min
  • 850 lbs
  • 2.75" - 18"
  • 5" - 27"
  • 3400 lbs
  • 3600 lbs
  • 72" x 72" (skid)
  • 220 volts, 3 phase, 60 Hz, 10 Amp (optional 440v, requires 5 Amp)
  • KTM-5VKF-E

  • 12" x 50"
  • 33"
  • 18"
  • 15.5"
  • 5.5" (4" w/ MillPwr-3 CNC control)
  • 26.75"
  • 5 HP
  • 60–500–4200 RPM (standard variable speed model)
  • NTMB-40
  • 4.173"
  • 0.0017" / 0.0032" / 0.0054" in/rev
  • 1.25" / 0.625" diameter
  • 8" diameter
  • 2.5 in³/min
  • 850 lbs
  • 4" - 19.5"
  • 5.25" - 32"
  • 3700 lbs
  • 4100 lbs
  • 72" x 72" (skid)
  • 220 volts, 3 phase, 60 Hz, 17 Amp (optional 440v, requires 8.5 Amp)Can run on single phase power
  • KTM-5AVKF

  • 13" x 59"
  • 39.37"
  • 20"
  • 20"
  • 5.5"
  • 21"
  • 5 HP
  • 70-4500 RPM
  • NTMB-40
  • -
  • -
  • -
  • -
  • -
  • 1200 lbs
  • 3.15" - 23.23"
  • 5.31" - 26.38"
  • 6050 lbs
  • 6300 lbs
  • 85" x 80" (skid)
  • 220 volts, 3 phase, 60 Hz, 25 Amp (optional 440v, requires 12.5 Amp)