KTM-4VKF-E CNC w/ MillPwr

Features

  • 3 HP AC-Freq drive head with digital spindle RPM display and load meter.  Automatic spindle direction reversal when switching between high and low speed gear ranges
  • 12” x 50” hardened and ground table top
  • 60-550-4500 spindle RPM (Hi/Low gear)
  • Automatic centralized lubrication system with metered check-valves
  • Single-phase or 3-phase power without the need for a phase converter
  • Hardened and Ground (Hrc-52) table surface and all slide ways
  • Solid box ways on saddle and column
  • Easy conversational programming, DRO-mode allows for full manual operations with built-in 3 axis absolute encoder glass scales
  • Engraving feature and DXF file import capability, USB drive and 12.1” high resolution flat panel color LCD display

   

Specifications

Specification KTM-3VKF CNC w/ MillPwrKTM-4VKF-E CNC w/ MillPwrKTM-5VKF-E CNC w/ MillPwr
Table Size 10" x 50" (Opt. 10" x 54") 12" x 50" 12" x 50"
Table Travel (X-Axis) 32" 30" 30"
Saddle Travel (Y-Axis) 14" 17" 17"
Knee Travel (Z-Axis) 15" 17.25" 17.5"
Quill Travel 4" 4" 5.5"
Ram Travel 22" 22" 26.75"
Spindle Motor 3 HP 3 HP 5 HP
Spindle Speed AC Frequency Drive Head 60-550-4500 RPM AC Frequency Drive Head 60-550-4500 RPM AC Frequency Drive Head 60-550-4500 RPM
Spindle Taper R-8 R-8 NMTB-40
Quill Diameter 3.375" 3.375" 4.173"
Quill Feed Rate 0.0015" / 0.003" / 0.006" in/rev 0.0015" / 0.003" / 0.006" in/rev 0.0015" / 0.003" / 0.006" in/rev
Drilling Capacity (Manual / Power) 0.75" / 0.37" diameter 0.75" / 0.37" diameter 0.75" / 0.37" diameter
Boring Capacity 6" diameter 6" diameter 6" diameter
Milling Capacity 2.0 in³/min 2.0 in³/min 2.0 in³/min
Maximum Work Load (Center) 850 lbs 850 lbs 850 lbs
Spindle Center to Column 5" - 27" 5" - 27" 5.25" - 32"
Net Weight 3100 lbs 3400 lbs 3700 lbs
Gross Weight 3300 lbs 3600 lbs 3900 lbs
Shipping Dimensions 72" x 72" (skid) 72" x 72" (skid) 72" x 72" (skid)
Power Requirements 220v, 3 phase, 60 Hz, 10 Amp (optional 440v power requires 5A) but can also accept 220v, 1-phase power (15A) without a phase converter, ideal for customers with only 1-phase power 220V 3-phase or 1-phase for machine, 10A (15A for 1-phase); Optional 440V requires 3-phase, 7.5A 110V dedicated for CNC control, 20A 220V 3-phase or 1-phase for machine 20A; Optional 440v requires 3-phase 10A; 110V dedicated for CNC control 20A

Accessories

Optional Accessories

  • Knee (Z-Axis) Power Feed
  • Air Power Drawbar
  • Flood Coolant System
  • Chip Pan
  • Riser Block
  • Angle-Lock Vise
  • Rustlick Coolant

Brochures

Title: Kent USA CNC Knee Mills with ACU-RITE G2 Control

Videos

CNC Knee Mill with ACU-RITE MILLPWR G2 Safety Features: Overview

CNC Knee Mill with ACURITE AMI Spindle Control Option: Overview

ACU-RITE MILLPWR G2 Control: Overview

Request for Info