KTM-4VKF-E

Features

  • 3 HP AC-Freq drive head with digital RPM display and analog load meter.  Automatic spindle direction reversal when switching between high and low speed gear ranges
  • 60-550-4500 spindle RPM (Hi/Low gear)
  • Automatic centralized lubrication system with metered check-valves
  • Single-phase or 3-phase power without the need for a phase converter
  • Hardened and Ground (Hrc-52) table surface and all slide ways
  • Solid box ways on saddle and column

   

Specifications

Specification KTM-3VKFKTM-4VKF-EKTM-5VKF-E
Table Size 10" x 50" (10" x 54" Optional) 12" x 50" 12" x 50"
Table Travel (X-Axis) 35" 33" 33"
Saddle Travel (Y-Axis) 15.25" 18" 18"
Knee Travel (Z-Axis) 15" 18" 18"
Quill Travel 5" 5.5" 5.5"
Ram Travel 22" 22" 26.75"
Spindle Motor 3 HP 3 HP 5 HP
Spindle Speed 50–550–4500 RPM (2-range, Hi/Lo) 50–550–4500 RPM (2-range, Hi/Lo) 60–500–4200 RPM (standard variable speed model)
Spindle Taper R-8 R-8 NMTB-40
Quill Diameter 3.375" 3.375" 4.173"
Quill Feed Rate 0.0015" / 0.003" / 0.006" in/rev 0.0015" / 0.003" / 0.006" in/rev 0.0017" / 0.0032" / 0.0054" in/rev
Drilling Capacity (Manual / Power) 0.75" / 0.37" diameter 0.75" / 0.37" diameter 1.25" / 0.625" diameter
Boring Capacity 6" diameter 6" diameter 8" diameter
Milling Capacity 2.0 in³/min 2.0 in³/min 2.5 in³/min
Maximum Work Load (Center) 850 lbs 850 lbs 850 lbs
Spindle Center to Column 5" - 27" 5" - 27" 5.25" - 32"
Net Weight 3100 lbs 3400 lbs 3700 lbs
Gross Weight 3200 lbs 3600 lbs 3800 lbs
Shipping Dimensions 76" x 76" x 88" (skid) 72" x 72" (skid) 72" x 72" (skid)
Power Requirements 220 volts, 3 phase, 60 Hz, 10 Amp (optional 440v, requires 5 Amp) 220 volts, 3 phase, 60 Hz, 10 Amp (optional 440v, requires 5 Amp) 220 volts, 3 phase, 60 Hz, 17 Amp (optional 440v, requires 8.5 Amp)Can run on single phase power

Accessories

Optional Accessories

  • Digital Readout System (View Brochure)
  • Table (X-Axis) Power Feed
  • Saddle (Y-Axis) Power Feed
  • Knee (Z-Axis) Power Feed
  • Air Power Drawbar
  • Flood Coolant System
  • Chip Pan
  • Riser Block
  • Angle-Lock Vise
  • Rustlick Coolant

Brochures

Title: Kent USA Mill Brochure 2018

Request for Info